SATO GT 410 Operator's Manual page 71

Unit 4: Operation
MENU
MAINTENANCE MODE
SERVICE MODE
FACTORY MODE
SENSOR LEVEL
I-MARK
LEVEL OFFSET
SENSOR LEVEL
I-MARK
SLICE LEVEL
SENSOR LEVEL
GAP
LEVEL OFFSET
SENSOR LEVEL
GAP
SLICE LEVEL
LABEL NEAR END
ENABLE DISABLE
SATO GT4xxe Series Operator Manual
SERVICE MODE (4-19)
The Maintenance Mode is divided into two sections; the Service
Mode and the Factory Mode.
The Service Mode allows the programming of various
dimensional settings, sensor thresholds, and language options.
The Factory Mode permits counter reset of various printer
components. Use the keys of the printer's operator panel to
select and reset those features.
Allows sensitivity adjustment of the eye-mark sensor.
X.XV
50
Allows slice level adjustment of the eye-mark sensor.
X.XV
1.0V
Allows penetrating sensor adjustment of the gap sensor.
X.XV
50
Allows slice level adjustment of the gap sensor.
X.XV
50
Select the ENABLE option to set the printer to automatically
notify when media is nearly exhausted.
PN 9001138A
DESCRIPTION
Page 4-43