SATO GT 410 Operator's Manual page 82

Unit 5: Troubleshooting
ERROR SIGNALS
Error No. LCD Display
01
02
03
04
05
06
SATO GTxxe Series Operator Manual
Machine Error
Cause: Circuit board problem.
Remedy: Contact a sales outlet, dealer, or service center.
Alarm sound: One long beep.
External signal: Machine error.
Flash ROM Error
Cause(s): 1. Flash ROM cannot be accessed.
2. Illegal firmware operation requested by software.
Contact a sales outlet, dealer, or service center.
Remedy:
One long beep.
Alarm sound:
Machine error.
External signal:
Parity Error
Cause(s): 1. RS-232C communication settings fail parity check.
2. Error in cable connection.
Ensure correct communication cables and settings.
Remedy:
Three short beeps.
Alarm sound:
Machine error.
External signal:
Overrun Error
Cause(s): 1. RS-232C communication settings exceed legal values.
2. Error in cable connection.
Check and correct communication cables and settings.
Remedy:
Three short beeps.
Alarm sound:
External signal: Machine error.
Framing Error
Cause(s): 1. Incorrect frame size for the RS-232C settings.
2. Cable connection trouble.
Check and correct communication cables and settings.
Remedy:
Three short beeps.
Alarm sound:
Machine error.
External signal:
Buffer Overflow error
Cause(s): 1. Size of received data exceeds size of receiving buffer.
2. Mismatched send/receive communication protocols.
Remedy: Establish the correct communication protocol.
Three short beeps
Alarm sound:
Machine error
External signal:
PN 9001138A
Description
Page 5-2