SATO GT 410 Operator's Manual page 57

Unit 4: Operation
MENU
ONLINE
QTY: 000000
OFFLINE
000000
INTERFACE CARD
SETTING
YES NO
INTERFACE CARD
SETTING
CARD1 CARD2
PROTOCOL
STATUS4
STATUS5
ITEM NO CHECK
ENABLE DISABLE
SATO GT4xxe Series Operator Manual
INTERFACE MODES (4-4 THROUGH 4-8)
Displays the operational status of the printer. The ONLINE
status is displayed on the top line and the label quantity status
on the bottom. The message will be changed to OFFLINE
whenever the printer is switched offline by pressing the LINE
key. When a print job is received, the quantity line will indicate
the number of labels to be printed. As the label job prints, the
display indicates the number of labels remaining to be printed.
Displays the operational status of the printer. The OFFLINE
status is displayed on the top line and the label quantity status
on the bottom. The message will be changed to ONLINE
whenever the printer is switched online by pressing the LINE
key.
Is the premiere screen of the Interface Mode. Interface Mode
allows the parameters to be set for the printer to communicate
with a host and vise-versa.
Select yes if an interface card for bi-directional communication
will be configured.
This menu allows the identification of which installed interface
card is used for bi-directional communication/printing. The
remaining card, by default, is assigned to the mini-LAN card for
transmitting printer status information to a LAN.
• CARD 1: Normal interface card.
• CARD 2: Mini-LAN
Allows item number check to be enabled or disabled. Will only
appear when Status5 is set for protocol.
PN 9001138A
DESCRIPTION
Page 4-29