SATO GT 410 Operator's Manual page 84

Unit 5: Troubleshooting
ERROR SIGNALS
Error No. LCD Display
12
13
14
15
16
SATO GTxxe Series Operator Manual
Memory Writing error
Cause(s): 1. Memory cartridge is not inserted.
2. Memory space is exhausted.
3. Read/Write operation has failed.
4. Memory is not properly formatted.
1. Ensure memory cartridge is installed.
Remedy:
2. Ensure sufficient memory space is available.
3. Replace the memory cartridge.
4. Format or reformat the memory cartridge.
Alarm sound: One long beep.
External signal: Machine error.
Memory Reading error
Cause: Memory space is exhausted.
Remedy: Delete unnecessary data to free up memory space.
Alarm sound: One long beep.
External signal: Machine error.
Download Data Error
Cause(s): 1. Received invalid download.
2. There is no download area.
1. Ensure the download data is correct.
Remedy:
2. Ensure the download data size is correct.
One long beep.
Alarm sound:
Machine error.
External signal:
Cutter error
Cause(s): The cutter unit is jammed or clogged.
Remedy: 1. Cutter blade did not returned to the home position.
Clean the cutter unit and clear any paper jams.
2. Press FEED to reinstate proper cutter blade position.
Alarm sound: Three short beeps.
External signal: Machine error.
Cutter Open error
Cause(s): 1. The upper bracket of the cutter unit is open
2. The sensor is malfunctioning
Remedy: Close the upper bracket of the cutter unit.
Three short beeps
Alarm sound:
Machine error
External signal:
PN 9001138A
Description
Page 5-4