SATO GT 410 Operator's Manual page 75

Unit 4: Operation
MENU
MAINTENANCE MODE
SERVICE MODE
FACTORY MODE
COUNTER CLEAR
NONE
ALL
HEAD
CUT
DISPENSE
COUNTER
INDICATION
NONE
LIFE
HEAD
CUT
DISPENSE
LIFE COUNTER
0. 0 M
HEAD COUNTER
[1] 0. 0 M
[2] 0. 0 M
[3] 0. 0 M
CUT COUNTER
SATO GT4xxe Series Operator Manual
FACTORY MODE (4-20)
The Maintenance Mode is divided into two sections; the Service
Mode and the Factory Mode.
The Service Mode allows the programming of various
dimensional settings, sensor thresholds, and language options.
The Factory Mode permits counter reset of various printer
components. Use the keys of the printer's operator panel to
select and reset those features.
Enables the printer's internal counter to be initiated and reset .
The counter options are : None, All, Head, Cut, and Dispense.
Allows view of cycles recorded by the printer's internal counter.
Enables view of the printer's internal life counter.
Displays values for the head counter.
Displays values for the cutter counter.
0
PN 9001138A
DESCRIPTION
Page 4-47