Advertisement
Min** Input Leve(sensitivity) is the smallest signal that will produce nominal ouput
(+4 dBu)with channel and master faders set for maximum gain.
Nominal* settings are defined as all controls set at 0 dB(or 50% rotation for rotary
pots)except the gain adjustment pot which is as specified.
Max* are defined as maximun input levels at the total harmonic distortion<0.05
Outputs
Function
Output Z
(ohms)
Main
50
Left/right
Aux
50
Headphone
40
Monitor
Gain
Mic/Line(1-8CH)Input Gain Adjustment Range:
Line(9-12CH)Input Gain Adjustment Range:
Line(13-16CH)Input Gain Adjustment Range:
Main Left&right/AUX/Monitor output gain
Adjustment Range:
Frequency Response
Mic Input to Left/Right Output,Max Input Gain
Mic Input to Left/Right Output, Input Gain 20
Total Harmonic Distortion
<0.004%Typical,Mic to Left/Right Output
Hum and Noise
Output Levels
Bal/Unbal
Nominal
Max
+4dBu
+15dBu
+4dBu
+15dBu
+4dBu
+20dBu
Channel Gain:off to 12 dB
Main
Channel Gain:off to 0 dB
AUX
Main Gain:off to 12 dB
Input Gain:10 dB to 46 dB
Channel Gain:off to 12 dB
Main
Channel Gain:off to 0 dB
AUX
Main Gain:off to 12 dB
Input Gain:-18 dB to 18 Db
Main
Channel Gain:off to 12 dB
AUX
Channel Gain:off to 0 dB
Main Gain:off to 12 dB
Input Gain:-12 dB to 12 dB
Output Gain:off dB to 12 dB
20Hz to 20 kHz +/- 1 dB
20Hz to 20 kHz +/- 0.5dB
@1 kHz
Connector
Bal
XLR
Pin1 G/Pin2 (+)/Pin3 (-)
Bal
XLR
Pin1 G/Pin2 (+)/Pin3 (-)
Unbal
TRS jacks
Tip (Left),Ring (Right),
Sleave (Gnd)
Advertisement
