Advertisement
After selected the Setup button, The Edit Process section is updated to display the following:
1
1. Host Address IP
2. Device List info
3. Search all devices connected to the network
In this section, the user can select the following views:
-Connection
-Access point setup (see appendix 2)
-WLAN setup (see appendix 2)
-LAN setup
-Firmware Update
-Name Edit
Connection:
Shows all device(s) added by user or automatic recognized by the mixer when the user adds a device to the "de-
vice list" the items "mode", "model", and "unique ID" fields are ampty but should be populated when the device
connects to software. The mode field specifies whether the interface is "WLAN" or "LAN". In the Model field, is
information concerning the extension card "analog extension --- DR16A", "DANTE entension --- DR16D", "Digi-
tal SPDIF extension --- DR16E".
---In the Unique ID field, is a string of 16 characters to identify the device.
---In the IP Address field, is the IP address of the device.
---In the Name field, there is the name of the device (max 16 characters). This can be changed with the "name
Edit" function.
---In the Status field, is the status of the device: (On-line/Off-line)
If the user clicks with the left mouse button in the device list row, then the software will show a menu with the
following items:
1. Add new
2. Delete IP
3. Connect IP (enabled if row is not empty) -- Note: User can only connect one device at a time On-line.
4. Disconnect IP (enabled if device selected is already connected)
(see appendix 2)
(enabled if the row is empty)
(enabled if row is not empty)
Setup Section
2
3
Advertisement
