Peavey Unity DR16 Quick Start Manuals page 16

Feedback Eliminator
After selecting the "FBK ELIM" button, the Edit Section will update to display the following:
There are two feedback eliminators available to the first 8 input channels. It is not possible to assign the two
Feedback Eliminators to the same channel. The Feedback Eliminator is not active until the Enable button is set to
ON. The user can also set the Frequency Displacement on each Feedback Elim, with a frequency range of 2Hz to
8Hz.
Note: the assignment of the channel will also be displayed on the relative input channel frame and on the Mixer
overview section.
-