Download Print this page

Peavey Unity DR16 Quick Start Manuals page 19

Digital mixing console

Advertisement

After selecting the "AUX1/2/3/4" button, the sw show the following frame:
1
2
1. LED Clip indicator
2. Vu-Meter before the process
3. LED Clip indicator
4. Compressor Activity (Yellow Line)
5. Vu-Meter after processing
6. Graph PEQ filter, Hp, Lp filter and GEQ
In the AUX Section the user can edit the following parameters:
–POLARITY: When the button is ON (Orange color) the polarity is set to 180°
–DELAY: from 0ms to 150ms step 0.05ms
–CMP: RMS Compressor, to use this function the user must first enable the compressor (ON, orange
color). The parameters for the compressor are: Threshold (from -30dBfs to 0dBfs, step0.2dB), RATIO (from In
1:Out 1 to In 32:Out 1), Knee (from 0% Hard Knee to 100% Soft Knee), RELEASE-TIME (from 1ms to 1sec, step
not linear), ATTACK TIME (from 1ms to 1sec, step not linear).
–HP/LP Filter: Bypass, 1st, 2nd, 3th, 4thorder Butterworth/Linkwitz filter; frequency from 20Hz to
20kHz step1Hz
–FEEDBACK ELIMINATOR: The Feedback Eliminator is independent of the FB Elim on inputs and
mains. The Feedback Eliminator is not active until the enable button is ON. The user can also set the Frequency
Displacement (range from 2Hz to 8Hz)
–3 EQ Filter: the parametric Eq filters are active only when the EQ Enable button is ON (button color
orange). Each filter can also be enabled or disabled using the ON/OFF button. Each filter type can be set to Peak
(BELL) or "Hi-Shelving" or "Lo-Shelving", the frequency can be set with a range of 20Hz-20kHz step 1Hz, the
Gain of the filter can be changed with the range of +/-12dB and the Q factor can be changed from 0.3 to 20. Each
filter is shown on the graphic and when the filter is enabled the User can modify the frequency and Gain using
the mouse directly in the graph. Click and hold the left mouse button on the squared colored handle in the graph
(one color per filter) and move the mouse up/down to change the gain and Left/Right to change the frequency.
In the graph, the user can also see the Hp/Lp Filter and the 31 Graphic EQ filter.
AUX 1/2/3/4 Section
6
3
4
5

Advertisement

loading