Peavey Unity DR16 Quick Start Manuals page 35

Digital mixing console

Unity Mixer WiFi module

2) WiFi Client (Station) mode

2) WiFi Client (Station) mode (WLAN)

In WiFi Client mode the module connects to a WiFi network and supports DHCP client or static IP

In WiFi Client mode the module connects to a WiFi network and supports DHCP client or static IP addressing.

addressing. This way, both the DR12 mixer and the remote control devices should be connected to an

This way, both the Unity mixer and the remote control devices should be connected to an external WiFi router as

external WiFi router as shown below.

shown below.

WiFi Client mode may be used to extend the WiFi range of the DR16 mixer.

Connection Parameters (DR16):

- IP Addressing: Dynamic (DHCP Client) or Static

- IP Address: 192.168.0.110 (Default). Used with Static IP addressing only

- Net Mask: 255.255.255.0 (Default). Used with Static IP addressing only

- IP Address: 192.168.0.110 (Default). Used with Static IP addressing only

- Gateway: 192.168.0.1 (Default). Used with Static IP addressing only

- Net Mask: 255.255.255.0 (Default). Used with Static IP addressing only

*Note* IP Address, Net Mask and Gateway are automatically assigned by the DHCP server (i.e. the WiFi router)

if the Dynamic IP addressing is selected.

- Gateway: 192.168.0.1 (Default). Used with Static IP addressing only

Connection Parameters (WiFi Router):

Note: IP Address, Net Mask and Gateway are automatically assigned by the DHCP server (i.e. the

WiFi router) if the Dynamic IP addressing is selected.

- SSID: WiFi Router network name

- Security: OPEN, WEP, WPA or WPA2

Connection Parameters (WiFi Router):

- Key: xxxxxxxx. Password of the WiFi router network

- SSID: WiFi Router network name

- Security: OPEN, WEP, WPA or WPA2

Table of Contents