Advertisement
Clicking on the "USB" button brings up the USB Recording/Playback window, which allows you to record or
play back stereo audio files from a connected USB thumb drive. The user can also create and store playlists of
audio files. The DR 16 mixer records the stereo audio files in a 16 bit ".wav" format with a 48 kHz sample rate.
1
4
1.) RECORD BUTTON – clicking the record button starts recording a new audio file. Click again to stop re
cording.
2.) FILE SPAN – Specifies the maximum recording time for the new audio file
3.) SOURCE – This section is used to select the signal source for your recording. Making the selection is a two
step process. First you select the section of the mixer that the record signal will come from by clicking the button
for one of the three sections; Input, Output or Pre GEQ. Once that selection is made, the specific channel(s) or
bus can be chosen.
INPUT- allows selection of any combination of input channels. The signal is sourced post
nel fader.
OUTPUT- allows selection of the main or aux buses "after" their output equalization
PRE GEQ- allows selection of the main or aux buses "before" their output equalization
4.) PLAYBACK TRANSPORT CONTROLS – Controls are: play/stop, pause, rewind, fast forward and loop the
playback
5.) PLAYLIST – load, save or create a new playlist of audio files.
6.) USB DEVICE CONTENT – View and select the audio files on the connected USB Device
USB RECORDING/PLAYBACK
2
6
3
5
chan
Advertisement
