Advertisement
After selecting the "INPUT" button, the Edit Process Section is updated to display the following:
1
2
3
9
1. Led Clip Indicator
2. Vu-Meter before processing
3. LED Signal presence indicator
4. Led Clip Indicator
5. Activity of the Compressor (yellow line)
6. Vu-Meter after processing (green line)
7. PEQ filter and HP Filter
8. Handle to modify the filter , frequency and gain with mouse.
9. Button to select Channel
10. Current input channel selected Indicator
The parameters of each channel are:
- Phantom: Only available when the source select is "MIC"
- Polarity: When the button is on (orange color), the polarity is set to 180°
- Link: when activated (orange color), the Left Channel parameters will be copied to Right Channel.
Then, all parameter edits will also be mirrored on the Linked Channel.
The Linked Channel Pairs are:
CH1&CH2 (CH1 is the Left and Ch2 is the Right)
CH3&CH4 (CH3 is the Left and CH4 is the Right)
CH5&CH6 (CH5 is the Left and CH6 is the Right)
CH7&CH8 (CH7 is the Left and CH8 is the Right)
CH9&CH10 (CH9 is the Left and CH10 is the Right)
CH11&CH12 (CH11 is the Left and CH12 is the Right)
CH13&CH14 (CH13 is the Left and CH14 is the Right)
CH15&CH16 (CH15 is the Left and CH16 is the Right)
INPUT Section
7
4
5
8
6
10
Advertisement
