Advertisement
Multiple System Control
WiFi Control of multiple DR mixers in the same system or facility.
When two or more DR mixers are operated in the same area, the WiFi settings in the mixers must be modified
for proper operation.
There are two different approaches that can be used for operation of multiple units. The first method works as
long as the control devices (computer or mobile device) will be used to operate only one of the mixers.
The Second method allows the same control devices to easily connect to and operate any of the mixers.
The main problem results when the WiFi radios in the mixers are used in access point mode using the default
mixer WiFi settings.
Solution 1: Control devices will primarily operate only one mixer. It is a good idea to perform these steps no
matter which solution you choose.
To allow each of the mixers to be independently operated, the SSID of the access point needs to be different for
each mixer.
With just one mixer powered on, connect to the mixer.
Go to the Setup>Access Point screen.
Change the SSID name for the Access Point of the mixer to a unique name that identifies that mixer. Below the
name was changed from DR16 to DR16 #1.
While you are in the vicinity, you will also want to change the name of the mixer that appears on the connection
screen.
Go to the Setup>Name Edit Screen
Advertisement
