Installing The Fluorescence Detector; Site Requirements - Agilent Technologies 1100 Series Reference Manual

1

Installing the Fluorescence Detector

Site Requirements

A suitable environment is important to ensure optimal performance of the
detector.
Power Consideration
The detector power supply has wide ranging capabilities and accepts any line
voltage in the range mentioned in
no voltage selector in the rear of the detector. There are also no externally
accessible fuses, because automatic electronic fuses are implemented in the
power supply.
To disconnect the detector from line, unplug the power cord. The power supply still
WA RN ING
uses some power, even if the power switch on the front panel is turned off.
Shock hazard or damage of your instrumentation can result, if the devices are
WA RN ING
connected to a line voltage higher than specified.
Power Cords
Different power cords are offered as options with the detector. The female end
of all power cords is identical. It plugs into the power-input socket at the rear
of the detector. The male end of each power cord is different and designed to
match the wall socket of a particular country or region.
Never operate your instrumentation from a power outlet that has no ground
WA RN ING
connection. Never use a power cord other than the Agilent Technologies power cord
designed for your region.
Never use cables other than the ones supplied by Agilent Technologies to ensure
WA RN ING
proper functionality and compliance with safety or EMC regulations.
14
Table 1 on page 16. Consequently, there is
1100 Series FD Reference Manual