Mounting and Commissioning
3.1 Mounting and Connections
Jumpers X71, X72 and X73 on the input/output module C-I/O-2 serve for setting the bus address and must nob
be changed. The following table shows the preset jumper positions.
Table 3-11
194
Jumper settings of the module address of the input/output module C-I/O-2
Jumper
X71
X72
X73
Factory setting
1-2 (H)
1-2 (H)
2-3 (L)
SIPROTEC, 7VK61, Manual
C53000-G1176-C159-3, Release date 05.2009