Specification - Rinnai Arriva 752 Installation Manual

Specification

Inbuilt power flued convection fan heater with electronic temperature control,
timers, and remote. Different frame and burn media options available (black
pebbles or white quartz).
Specification summary
Input = 8-31.5 MJ/h
Output = 1.8-7.0 kW*
Efficiency = 79-89%
Heating area = 70-108 m
Gas type = NG or ULPG
* Will vary according to gas type and flue configuration
** Will vary depending on geographical location in NZ
Suitability
Ideal for living rooms and open plan areas. Versatile
power flue system makes for easy installation in almost
any living space including bedrooms.
The Arriva is best suited for a new build installation
into a mock (false) chimney.
Room size consideration
Due to the high efficiency of the fire, the Arriva is
not suitable for small rooms. Small rooms will heat
up quickly, and once the set temperature has been
reached the flame picture will reduce significantly (and
in some cases reduce to pilot only). This is not ideal if
customers want a full flame picture to be visible for the
majority of time that the fire is on.
Convection fan
3-speed fan. Heat is distributed from the bottom of the
unit.
710
660
4 | Arriva 752 Installation Guide: 12218-F 06-18
2 **
1050
230
Two piece frame: A = 98, B = 20
Single frame:
Data plate
Inside the unit, upper RHS, beside the convection fan.
Gas connection
½ " BSP male flare union, lower RHS of unit.
Ignition: Continuous spar electronic ignition.
Noise level: 33-41 dB(A)
Power flue
Inner 50 mm, outer 70-80 mm. Appliance must be
installed with a Rinnai flue system.
Power consumption and electrical supply
High = 90 W
Low = 60 W
Standby = <8 W
Comes with a 1.5 m power cord and 3-pin plug. The
standard electrical connection is to the RHS of the unit.
Safety devices
Flame failure sensing system, pressure relief, overheat
safety switch, air temperature sensor, thermal fuse,
overcurrent fuse, and spark detector.
Temperature control
Thermostat control, temperature range 16-26 °C.
Weight: 70 kg
76
845
365
A
A = 90, B = 12
Dimensions are in mm.
B
365