Panel Installation - Rinnai Arriva 752 Installation Manual

Panel installation

The fascia of the Arriva 752 is fully assembled and packaged in a separate carton. Always inspect
the glass for any chip or obvious sign of damage before installation. Care is required when
handling the front fascia—no sudden impact or excess force should be applied.
Glass panels
Always wear gloves and safety
glasses when handling glass.
Installing the front panel
Remove and put aside the two
fascia retaining screws from the
lower fascia mounting brackets
of the heater engine.
Mount the fascia by hooking the
top of the fascia to the body and
rotating the bottom in towards
the engine body.
Using the fascia retaining
screws, secure the fascia to the
heater engine through the front of the warm air discharge louvre.
Fascia panel
Fascia panel
Fascia retaining
screws and lower mounting brackets
Fascia retaining
screws
Warm air discharge
louvre
Top of panel
Arriva 752 Installation Guide: 12218-F 06-18 | 15