Table of Contents
Advertisement
REASSEMBLY
*
Reassemble
and
remount the front
fork in the
reverse order
of
disassembly and removal and
also carry out the following
steps:
INNER TUBE
METAL
Hold
the
inner tube vertically and clean the
metal groove.
m
Clean the new metall inner surface and install it
to
the metal groove of the inner tube as shorn.
-
-
CAUTION.
Use special
cars
to prevent
damage
t o the
Teflon coated surface of the Anti-friction
metal when mounting it.
DAMPER ROD BOLT
Apply Thread
Lock Cement and SUZUKl
BOND N0.1215
20
the damper rod bolt. Tight-
en the
damper rod bolt
with specified torque.
99000
- 32Q40
991
04
-
31 11 0
OUTER TUBE METAL, SPACER AND OIL SEAL
Clean the metal groove of the outer tube. Clean
the
new metal outer surface and install
it
to the
metal groove
of the outer tube
as
shown.
Thread Lock Cement
SUZUK I BOND NO. 121
5
,
Tightening torque
2 . 0 - 2 -
(14.5
-
19.0 Ib-ft)
Thread Lock Cement
(SUZUKI
BOND
No.
1215
CAUTION:
Use
special care to prevent damage to the
Teflon coated surface of the Anti-friction
metal when mounting
it.
09940-50111
Frontforkoilsealinstaller
Advertisement
Table of Contents
