Suzuki GS1100G 1982 Service Manual page 146

4-31 SHAFT DRIVE
Install the ball bearing onto the final driven
gear, using the special tool
@
.
*
Place the final driven gear shims on the driven
gear needle bearing, oil the bearing with Hy poid
gear oil, and install the driven gear into the final
O
gear
case completely.
Oil
the final driven gear ball
bearing
with Hy-
poid gear oil, place the shims removed during
disassembly on the bearing, and install the final
driven gear 'bearing case, without oil seal. Install
the ten bolts and tighten
to
specification.
09924
-
74570
Final driven gear bearing
installer
,
Final gear bearing
cover
bolt tightening torque
C
2.0 - 2.6
kg-rn
(14.5 - 19.0 lb-ft)