Electrical connection
6.3 Connecting
● Use shielded cables.
● In the case of aluminum connecting bars, insert a steel washer between the cable lug and
6.3.4
Electrical connection data
Cable entry and technical connection data depend on the mounted terminal box. You can find
more information on the terminal box that is mounted in the ordering documentation or in the
catalog.
60
connecting bar. This prevents contact corrosion.
CAUTION
Close unused screw threads with a metallic locking screw certified for use in Zone 2 or
Zone 22 or which is bonded in position and cannot be removed. This achieves the required
IP degree of protection and high-frequency shielding.
1XB7 322
1XB7 422
Operating Instructions 05/2012 A5E03986435A AA
SIMOTICS M-1PH8