Checking The Delivery; Requirements For Safe Lifting And Transporting - Siemens SIMOTICS M-1PH8 Operating Instructions & Installation Instructions

Preparations for use
4.11 Transport and storage
4.11.1

Checking the delivery

Checking the delivery for completeness
The drive systems are put together on an individual basis. When you take receipt of the
delivery, please check immediately whether the items delivered are in accordance with the
accompanying documents. Siemens will not accept any claims relating to items missing from
the delivery and which are submitted at a later date.
● Report any apparent transport damage to the delivery agent immediately. Never
● Report any apparent defects/missing components to the appropriate Siemens office
These safety instructions are part of the scope of supply; keep them in a location where they
can be easily accessed.
4.11.2

Requirements for safe lifting and transporting

● Personnel operating cranes and fork-lift trucks must be appropriately qualified.
● When lifting the machine, use only approved and undamaged sling guides and spreaders
● When lifting the machine, refer to the information on the lifting plate.
● When lifting, use only the load handling attachments on the stator casing, such as load
Transporting or lifting the motor
The machine or the machine set may be lifted and transported only using the load handling
attachments at the intended positions. Otherwise, the machine may tip over, slip in the
direction of lifting or fall.
This can result in death, serious injury or material damage.
1. Only use the load handling attachments on the stator frame to lift the motor.
2. Use suitable rope guiding or spreading devices. The weight of the machine is shown on
34
commission a damaged motor.
immediately.
of sufficient rated capacity. Check these before using them. The weight of the machine is
shown on the rating plate.
– Comply with the specified spreading angles.
– Do not exceed the maximum lifting acceleration and lifting speed specified on the lifting
plate. Lift the machine without jerking it.
Acceleration a ≤ 0.4 g
Speed v ≤ 20 /
m
min
stands or eye bolts.
WARNING
the rating plate.
Operating Instructions 05/2012 A5E03986435A AA
SIMOTICS M-1PH8