Connecting The Speed Encoder - Siemens SIMOTICS M-1PH8 Operating Instructions & Installation Instructions

Electrical connection
6.4 Auxiliary circuits
Figure 6-3
CAUTION
Rotating the external fan
If you rotate the external fan through 90°, then it is not permissible that the cable outlet faces
upwards. Water that accumulates at the cable glands can result in a short circuit.
Rotate the terminal box cover of the external fan through 180°.
See also
Interlock circuit for the external fan (Page 31)
6.4.5

Connecting the speed encoder

The speed encoder is connected at the terminal box using a plug connection
on the terminal box enclosure. A protective tube for disassembly
fastener when removing the signal connector.
68
External fan terminal box
①
(schematic representation)
Operating Instructions 05/2012 A5E03986435A AA
①
. This is located
②
is supplied as special
SIMOTICS M-1PH8