Function Setting
3-3-7 Interlock Setting Changing Function
7. Interlock setting
changing function
Input
password
8. To External device
monitor setting
changing function
*: When two or more SF4B / SF4B<V2> series are connected, cancel the protective function of all
SF4B / SF4B<V2> series.
<Setting of the interlock>
Mode 0: Start / restart interlock function (factory setting)
Mode 1: Start interlock function
Mode 2: Restart interlock function
Mode 3: Ineffective
Note: When using SF-C14EX, the display does not change even if ENTER key is pressed.
(Mode 0, Start / Restart interlock function)
33
Setting selection
Send
(Mode 0)
(Mode 1)
(Mode 2)
(Mode 3)
© Panasonic Electric Works SUNX Co., Ltd. 2011 MJE-SFBHC No.0024-49V
OK
To 7
NG
(Error)
key operation
: FUNCTION
: ENTER
: CANCEL
: -
: +