3-2-10 Initialization Function
The settings can be initialized. (factory setting) (Note 1)
The factory setting of each function is as follows.
Fixed blanking function
Floating blanking function
Auxiliary output switching function
Emission intensity control function
Setting of the muting function on each beam channel
Muting setting
Muting input conditions
changing func-
Setting of the muting lamp diagnosis function (Ver. 2 or later)
tion
Muting sensor output operation setting (Ver. 2.1 only) (Note 2)
Interlock setting changing function (Note 2)
External devise monitor setting changing function (Note 2)
Override setting changing function (Ver. 2.1 only) (Note 2)
Notes: 1) The setting of the protective function and the setting data of the copy function are not initialized.
2) This function cannot be set when SF-C14EX is used.
3-2-11 Setting Contents Monitoring Function
Each setting of the SF-C14EX series can be monitored. The following can be monitored.
Model No. / the number of beam channels
6HWWLQJ RI WKH ¿[HG EODQNLQJ IXQFWLRQ 5HDGLQJ RXW WKH UHFRUG RI WKH ODWHVW WLPHV LV SRVVLEOH
6HWWLQJ RI WKH ÀRDWLQJ EODQNLQJ IXQFWLRQ 5HDGLQJ RXW WKH UHFRUG RI WKH ODWHVW WLPHV LV SRVVLEOH
Setting of the auxiliary output switching function
Setting of the emission intensity control function
Setting of the muting setting changing function
(Reading out the record of the latest 5 times is possible, however, only for setting beam channel.)
3-2-12 Override Setting Changing Function (Ver. 2.1 only)
This function cannot be set when SF-C14EX is used.
© Panasonic Electric Works SUNX Co., Ltd. 2011 MJE-SFBHC No.0024-49V
Function
Functional Descriptions
Setting
Ineffective
Ineffective
Mode 0
Normal mode
Effective for all beam channels
A = B
Effective
-
-
-
-
22