Table of Contents
Advertisement
Functional Descriptions
Muting input conditions
The order for inputting the muting input A and B, which the muting function activates, can be set.
$
E (IIHFWLYH HYHQ HLWKHU FRPHV ¿UVW
$
E (IIHFWLYH RQO\ ZKHQ WKH LQSXW $ FRPHV ¿UVW
E
$ (IIHFWLYH RQO\ ZKHQ WKH LQSXW % FRPHV ¿UVW
Note: The setting is possible for each channel.
Setting of the muting lamp diagnosis function (Ver. 2 or later)
The muting lamp diagnosis function can be set to "effective / ineffective." (Note)
The factory setting of this function is effective.
ON : The muting lamp diagnosis function is effective.
OFF : The muting lamp diagnosis function is ineffective.
Note: If the muting lamp diagnosis function is set to ineffective, the muting function is maintained even if the lamp blew.
Muting sensor output operation setting (Ver. 2.1 only)
This function cannot be set when SF-C14EX is used.
3-2-7 Interlock Setting Changing Function
This function cannot be set when SF-C14EX is used.
3-2-8 External Device Monitor Setting Changing Function
This function cannot be set when SF-C14EX is used.
3-2-9 Protective Function
The functional settings are not allowed to change without the input of a password.
When the protective function is set to "effective," the setting can be changed by inputting the password.
The setting contents monitor function can be used regardless of the protective function "effective / ineffective."
The password should be a 4-digit number from 0 to 9. (The password of the factory setting is "0000.")
The protective function is set on the SF-C14EX.
21
When the protecting function is set to "ineffective," the third person may change the set-
ting. It is recommended that the protecting function should be set to "effective" so as not
to change the setting by the third person.
7DNH VXI¿FLHQW FDUH QRW WR IRUJHW WKH VHW SDVVZRUG ,Q FDVH \RX IRUJHW WKH SDVVZRUG
please contact us.
© Panasonic Electric Works SUNX Co., Ltd. 2011 MJE-SFBHC No.0024-49V
Advertisement
Table of Contents
