Setting Contents Monitoring Function - Panasonic SFB-HC Instruction Manual

Function Setting

3-3-11 Setting Contents Monitoring Function

11. Sub display
function / Set-
ting contents
monitoring
Select sensor
function
(Main sensor)
12. To Sub display
function / Over-
ride setting
changing
function
(Sub sensor 1)
(Sub sensor 2)
*: CLR,
100 to 600 (unit of 10)
*: 60 to 600 (unit of 10)
Notes: 1) The indication is on the main sensor (CH1) only.
2) When using SF-C14EX, this is not indicated.
37
Fixed blanking
function
Floating blanking
function
Floating blanking (Current setting)
function
(Emission intensity control function)
(Effective)
(Note)
(Auxiliary output switching function)
(Positive logic of OSSD)
(Protect function)
(Effective)
Muting setting
Muting sensor
changing function
output operation
setting
(NONO)
(Note 1)
(Note 2)
(Note 2)
Interlock setting
changing function
(Mode 1)
(Note 1)
(Note 2)
External device monitor
setting changing function
(Effective)
(Note 1)
(Note 2)
Override setting
changing function
(Model No.)
(No. of beam channel)
© Panasonic Electric Works SUNX Co., Ltd. 2011 MJE-SFBHC No.0024-49V
Detail display
(Only for SET)
(Effective)
(Record 1) (Effective)
Keep pressing switch OK
(Record 5)
Muting lamp
diagnosis
function setting
(Effective)
Fixed blanking Detail display
function (Only for SET)
(Current setting) (Effective)
(Record 1) (Ineffective)
Keep pressing switch
OK
(Record 5)
Muting on each
Beam channel display of the
beam channel
record 0 (Only for SET)
(Current setting) (Effective)
(Record 1) (Ineffective)
Keep pressing switch OK
(Record 5)
key operation
: FUNCTION
: ENTER
: CANCEL
: -
: +