Fisher & Paykel OR90SDG6 User Manual page 71

PROBLEM
GENERAL
I can feel hot air
blowing out of the vents
after I have turned the
oven off.
The oven fan comes on
when I select a function
that does not use a fan
(eg bake).
The oven has reached
the set temperature
but the temperature
dial halo is still red
(indicating that the oven
is not ready to use).
The oven is heating but
the display is dark.
The oven cancels
automatic cooking when
I try to adjust the clock
setting.
The temperature dial
halo never turns white
when I use Grill
The displays work,
and the function and
temperature dials halos
come on but the oven
does not heat up.
TROUBLESHOOTING TROUBLESHOOTING
POSSIBLE CAUSES
This is normal.
This is normal.
The fan comes on while the
oven is preheating. It may turn
off when the oven has reached
the set temperature.
This is normal: when heating
up from cold, your oven is
designed to initially heat to a
temperature somewhat higher
than what you have set. This
is to provide optimal baking
conditions right from the start.
The oven is set to 'Display off'
option.
The oven is in Sabbath setting.
The oven was set for automatic
cooking when you were trying
to adjust the clock setting.
This is normal: the halo stays red to indicate that the grill
element provides instant radiant heat.
.
The oven is in 'Demo' mode.
WHAT TO DO
For safety reasons the
cooling fans will continue
to run even when you have
turned the function dial to
'OFF'. The fans will switch
off automatically when the
oven has cooled.
Wait until a long
tone sounds and the
temperature dial halo turns
white: the oven will then be
ready to use.
Wait until a long
tone sounds and the
temperature dial halo
turns white: the oven will
then be ready to use.
To quit the 'Display off'
option, press and hold
CANCEL until the display
shows the time of day.
To quit Sabbath setting,
press and hold CANCEL
until the display shows the
time of day.
You can only adjust the
clock setting while the oven
is not set for automatic
cooking.
Call Customer Care.
69