Answering An Outside Call; Universal Answer (Ua) Device; Recall Dial Tone; Sending A Flash - Samsung iDCS500 User Manual

Samsung iDCS500

ANSWERING AN OUTSIDE CALL

Your keyset status indicator flashes green for incoming outside calls.
§
Lift the handset and you are automatically connected to the ringing call.
(See Ring Preference
OR
Press the ANS/RLS key to automatically answer on the speakerphone.
Note: If a call is flashing at your keyset, but not ringing, you must press the flash-
ing Call key to answer.

UNIVERSAL ANSWER (UA) DEVICE

Outside lines can ring over the paging system or to a loud ringer. To answer
ringing calls dial 67 or press the UA key. The UA device can operate in Day
or Night mode and in any one of six different ring plans.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the Speaker key before dialling.

RECALL DIAL TONE

§
Press the NEW key to disconnect your existing call, wait for dial tone
and then make a new call on the same line.
Note: If the NEW key does not appear on your keyset, the FLASH key may be pro-
grammed to recall dial tone.

SENDING A FLASH

While on an outside call, press the programmed FLASH key to send a flash
to the telephone company. This is required for some custom calling features
or CENTREX use (e.g. for nuisance calls).
Note: Flash is not available on ISDN circuits.
in the section "Customising Your Keyset.")
– 11 –
iDCS Keyset User Guide