One-Touch Speed Dialling; Last Number Redial - Samsung iDCS500 User Manual

Samsung iDCS500
For example, if you program a speed dial number with the phone number 9-
[0121]728765, when you later dial this speed dial number the display shows
****728765.
Note: When programming an outside number, enter the access code (e.g. 9 or 0)
before you press E to hide any digits.
F is used to enter a name for the speed dial number. See
Dial Names in the section "Display Features" .
Use the HOLD key to clear a speed dial number and/or name.

ONE-TOUCH SPEED DIALLING

You can assign any personal or system speed dial number to an already
programmed speed dial key for quick and easy one-touch dialling of fre-
quently-used numbers.
1. While on-hook, press the Transfer key and dial 107.
2. Press an SPD key.
3. Dial the speed dial number that you want assigned to this key.
4. Press the Transfer key to store your selection.
To call this number, simply press the SPD key.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the Speaker key before you begin dialling.

LAST NUMBER REDIAL

To redial the last outside number you dialled:
§
Press the Redial key
OR
Press the LNR key (or the LNR soft key in the CALL menu).
OR
Dial 19.
Note:
If the Hot Keypad feature has been turned off, you must first lift the handset or
press the Speaker before you begin dialling.
Redial does not apply to internal calls.
iDCS Keyset User Guide
– 31 –
Personal Speed