In Group / Out Of Group - Samsung iDCS500 User Manual

Samsung iDCS500 iDCS Keyset User Guide

IN GROUP / OUT OF GROUP

If your keyset is assigned to a station ring group, you can remove your key-
set from the group (and re-enter it later). While you are out of the group, you
can receive calls to your extension number but not calls to the group number.
If you have an IN/OUT key programmed:
1. Press the IN/OUT key. It will light red when your keyset is in the group.
2. Press the IN/OUT key again to exit the group and turn the light off.
3. When you wish to return your extension to the group, press the IN/OUT
key again. The key LED will light red.
The IN/OUT key can include an extender to indicate the specific group that
this key will affect. This means that if you are in multiple groups, you can
decide for which groups you will receive calls.
If you do not have an IN/OUT key, check with your system administrator
whether a system access code exists for this feature and enter it here.
(IN/OUT GROUP code: )
Dial the system access code followed by the group number, and then
dial 0 to exit the group or 1 to enter the group.
(Alternatively, press the IOG soft key in the in the OTHER menu, enter the
group number and then exit/enter.)
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the Speaker key before you begin dialling.
The IN/OUT key can include an extender to indicate the specific group that
this key will affect. This means that if you are in multiple groups, you can
decide for which groups you will receive calls (see Adding Extenders to Key
Assignments in the section "Display Features").
– 49 –