Lcr With Clear; Calling Line Identification Presentation (Clip); Selecting Your Clip Display - Samsung iDCS500 User Manual

Samsung iDCS500 iDCS Keyset User Guide
There are 25 messages (01-25) stored in system memory that can be sent to
another display keyset. (Refer to Programmed Messages in the section "Pag-
ing and Messaging.") If programmed, your keyset will display a TMSG option
in the LCD.
1. Press the TMSG soft key to begin text messaging.
2. Dial the 2-digit number for the desired message OR use the Volume keys
to scroll through the available messages and select.
3. Press the SEND soft key.
If the other station responds to this message using the same procedure, it
will display in your LCD. At no time is your current call interrupted. When
either station presses the EXIT soft key the displays at both stations return
to their previous call progress conditions.

LCR WITH CLEAR

When you are making an outside call using Least Cost Routing (LCR) and
you dial an incorrect digit, you can press the CLEAR soft key and reenter the
telephone number. You do not need to redial the access code for LCR again.
CALLING LINE IDENTIFICATION
PRESENTATION (CLIP)
CLIP is information that can be displayed when a call is received at your
keyset, normally the caller's name or number.

SELECTING YOUR CLIP DISPLAY

You can decide if you want to see the name or number in the display first, or
no CLIP display. Regardless of which one is selected, you can use the NND
function to view the remaining CLIP information. To select the type of CLIP
information you wish to view first:
1. While on-hook, press the Transfer key and dial 119.
2. Dial 0 if you do not wish to view CLIP information, or 1 to view the NUM-
BER first, or 2 to view the NAME first.
3. Press the Transfer key to store your selection.
– 62 –