Placing Calls; Outside Calls; Internal Calls; Speakerphone Calls - Samsung ITP-5012L Quick Reference Manual

This QUICK REFERENCE GUIDE
ITP-5012L telephone.
When making internal and external calls, press the SCREEN button to access
the programmable button screens. Then use the SCROLL button or the
UP/DOWN arrow (select) buttons on the display.
IMPORTANT:
Put your phone in OVERLAP MODE by pressing the MENU
button, select CONFIG and then select DIAL MODE, change it to OVERLAP. If
your phone is not in OVERLAP mode you must always press the SEND button
after dialing the digits to send the call.

OUTSIDE CALLS

Lift the handset.
Press an idle outside line button, line group button, or dial a line access
code to receive dial tone.
Dial the telephone number.
Replace the handset or press the END button when the call is completed.
NOTE: To call preprogrammed speed dial numbers, lift the handset and press
the appropriate key to call these numbers. You can also add telephone
numbers you call frequently to the PhoneBook.

INTERNAL CALLS

Lift the handset.
Dial the extension number or group number.
Wait for the party to answer. If you hear a brief tone burst instead of ring-
back tone, the station called is set for Voice Announce or Auto Answer.
Begin speaking after the tone.
Replace the handset or press the END button when the call is completed.

SPEAKERPHONE CALLS

capability. This feature is used for both internal or external calls. To activate this
feature:
Press the SPEAKER button.
Place an internal or external call.
Press SPEAKER button to disconnect the call.
NOTE: The handset can be used at any time during the conversation. To resume
handsfree operation, press the SPEAKER button, and replace the hand-
set.
provides the basic operation of your Samsung

PLACING CALLS

-
To place a call to an outside party:
-
To place a call to another extension at your location:
-
Your Samsung ITP-5012L has full speakerphone