Ipv6/Port Filter Screen - ZyXEL Communications LTE3202-M430 User Manual

9.7 IPv6/Port Filter Screen

The LTE3202-M430 firewall is a packet filtering firewall and restricts access based on the source/
destination computer network address of a packet and the type of application. Use this screen to
configure IP filtering rules. To access this screen, click Configuration > Firewall > IPv6/Port Filter.
Figure 48 Configuration > Firewall > IPv6/Port Filter
The following table describes the labels in this screen.
Table 31 Configuration > Firewall > IPv6/Port Filter
LABEL
IPv6 Port Filter
Enable IPv6 Port
Filter
IPv6 Port Filtering
Policy
Blacklist/
Whitelist
Add New
Source IP
Port
Protocol
Dest. IP
Port
Comment
Action
Apply
Cancel
Chapter 9 Firewall
DESCRIPTION
Select the check box to enable the rule.
Select Whitelist: Allow only IPv6/Port in the list. to allow packets that match the filtering rules
defined on this screen to pass through. Select Blacklist: Reject only IPv6/Port in the list. to block
packets that match the filtering rules defined on this screen.
This displays how many entries you have in the Whitelist/Blacklist summary tables.
Click Add New to create a new rule.
This field displays the rule index number.
This field displays the source IPv6 addresses to which this rule applies.
This field displays a single port number of the source or a port range.
Enter the port number/range of the source that define the traffic type, for example TCP port 80
defines web traffic.
This field displays the protocol (TCP, UDP, TCP+UDP or any) used to transport the packets for
which you want to apply the rule.
This field displays the destination IPv6 addresses to which this rule applies.
This field displays a single port number of the destination or a port range.
Enter the port number/range of the destination that define the traffic type, for example TCP port
80 defines web traffic.
Enter descriptions of the rule in this field.
Click Edit to go to the screen where you can edit the filtering rule.
Click Delete to remove the filtering rule.
Click Apply to save your changes back to the LTE3202-M430.
Click Cancel to reload the previous configuration for this screen.
LTE3202-M430 User's Guide
71