ZyXEL Communications LTE3202-M430 User Manual page 32

Figure 16 Monitor > LTE modem status
The following table describes the labels on this screen.
Table 12 Monitor > LTE modem status
LABEL
Modem Information
Module Name
IMEI/MEID
HW Version
FW Version
SIM Status
SIM
PIN Code Status
PIN Code Remaining Times
PUK Code Remaining Times
Service Information
Operator
MCC
MNC
Chapter 5 Monitor
DESCRIPTION
This displays the name of the built-in LTE module.
This displays the International Mobile Equipment Number (IMEI) or Mobile Equipment
Identifier (MEID), which is the serial number of the built-in LTE module. It is a unique
15-digit number used to identify a mobile device.
This displays the hardware version of the built-in LTE module.
This displays the firmware version of the built-in LTE module.
This displays the status of the inserted SIM card. N/A displays if there is no SIM card
inserted.
This displays the status of PIN code authentication.
This displays how many times you can enter the PIN code.
This displays how many times you can enter the PUK code.
This displays the name of the service provider.
This displays the Mobile Country Code (MCC), which is used to identify the country
of a mobile subscriber.
This displays the Mobile Network Code (MNC), which is used in combination with
MCC to identify the public land mobile network (PLMN) of a mobile subscriber.
LTE3202-M430 User's Guide
32