The Dhcp Table Screen - ZyXEL Communications LTE3202-M430 User Manual

Figure 11 Monitor > Log
The following table describes the labels on this screen.
Table 7 Monitor > Log
LABEL
Enable Log
Log Level
Enable Remote Log
Remote Log Host
Remote Log Port
Apply
Cancel
Refresh

5.4 The DHCP Table Screen

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain
TCP/IP configuration at start-up from a server. You can configure the LTE3202-M430's LAN as a DHCP
server or disable it. When configured as a server, the LTE3202-M430 provides the TCP/IP configuration for
the clients. If DHCP service is disabled, you must have another DHCP server on that network, or else the
computer must be manually configured.
Chapter 5 Monitor
DESCRIPTION
Select this to enable Log
Select this to send the logs to a remote host.
Enter the remote host's IP address.
Enter the port used for this service.
Click Apply to save your changes back to the LTE3202-M430.
Click Cancel to reload the previous configuration for this screen.
Click Refresh to renew the Log screen.
LTE3202-M430 User's Guide
28