Remote Management; Chapter 12 Remote Management; Overview; What You Can Do In This Chapter - ZyXEL Communications LTE3202-M430 User Manual

12.1 Overview

Use the Remote Management screens to configure the LTE3202-M430's web interface port, TR-069 auto-
configuration settings and activate UPnP. Additionally you can set up different bandwidth
management profiles that provide a convenient way to manage the LTE3202-M430's network.

12.1.1 What You Can Do in this Chapter

• Use the Web interface screen to modify the server port for the HTTPS service
• Use the TR069 screen to configure the LTE3202-M430 to be managed by an ACS
page 80).
• Use the Telnet screen to enable Telnet in the LTE3202-M430 LAN/WAN interfaces
page 81).
• Use the UPnP screen to enable UPnP on the LTE3202-M430
• Use the Bandwidth Management screen to configure bandwidth management profiles
on page

12.2 The Web Interface Screen

Use the Web interface screen to change the LTE3202-M430's WAN interface remote management
settings. Click Configuration > Remote Management > Web interface to open the following screen.
Figure 55 Configuration > Remote Management > Web interface
The following table describes the labels on this screen.
Table 37 Configuration > Remote Management >
LABEL
Web interface
Https port

Remote Management

83).
DESCRIPTION
You may change the server port number for a HTTPS service if needed. However you
must use the same port number in order to use that service for remote
management.
LTE3202-M430 User's Guide
C
H A P T E R
(Section 12.5 on page
79
12
(Section 12.2 on page 79).
(Section 12.3 on
(Section 12.4 on
82).
(Section 12.6