Manual On-Off / Smart Thermostat / Standard Thermostat - FireplaceXtrordinair ProBuilder Linear 42 GSR2 Owner's Manual

12

Manual On-Off / Smart Thermostat / Standard Thermostat

Use the thermostat button to cycle through the three thermostat settings (see
Look here for the
thermostat setting.
 MANUAL ON/OFF – The burner will turn on and off using the remote (see
On/Off button to control the burner. When off, the display will only show the current temperature.
 SMART THERMOSTAT – While in smart thermostat, the transmitter will control the burner to
achieve the target temperature (see
allow operation without turning the burner on and off (also called "smart modulation"). To adjust
the target temperature, press the UP and DOWN buttons until a suitable temperature is achieved.
When in smart thermostat
setting, the word "SMART"
will appear here.
 STANDARD THERMOSTAT - While in standard thermostat setting, the transmitter will turn the
burner on and off to achieve the target temperature (see
temperature, press the up and down buttons until a suitable temperature is achieved.
When in standard thermostat
setting, the word "ON" will
appear here.
NOTE: If the transmitter batteries go dead while in thermostat setting (standard or smart), the appliance
will shut off after approximately 24 hours.
© Travis Industries
Operation
F
ON
When in manual setting, the
word "OFF" will appear here.
Figure 7
SMART
ON
Press the thermostat button to cycle
through the thermostat settings.
OFF
below). Flame height will be adjusted up or down to
F
This is the target
temperature on the read-
out. Use the up or down
buttons to adjust the target
temperature.
Figure 8
F
This is the target
temperature on the
read-out. Use the up or
down buttons to adjust
the target temperature.
10/24/19 - 1523
).
Figure 5
OFF
ON
SMART
). Press the
Figure 6
F
below). To adjust the target
PB 42, 54 & 72 Linear GSR2 Operation
Figure 5
Figure 6
Figure 7
Figure 8