Writing Additional Pattern Data To An Usb Memory - Brother KE-430HX Service Manual

5. SETTING FUNCTION

5-18-6. Writing additional pattern data to an USB memory

1
2
For example, to read pattern No. 200
3
4
Exit read/write mode
5
・ At the Read/Write data screen, you can press the back key
setting menu.
・ In addition, when the home key
75
Select item No. "4" in the Read/Write data screen.
(Refer to "5-18-2. Preparation for reading/writing data".)
・ The numbers for the additional sewing program data
contained in the sewing machine's memory are displayed on
the screen.
(The initial value displayed is "ALL".)
Press the
additional pattern that you would like to write (ALL, 1 to 500).
・ When "ALL" is displayed, all of the additional pattern data
will be read at once.
・ The additional pattern numbers displayed will only be those
that are in the sewing machine. (If there is no data in the
machine, "ALL" will be the only thing displayed.)
Press the OK key
・ "Writing data" will be displayed on the screen until writing is
complete.
・ Immediately after the key is pressed, the buzzer will sound
and the selected pattern data will be read from the USB
memory and copied into the sewing machine's memory.
When the screen display returns to the status before writing
started, writing of the additional pattern data is complete.
・ If you would like to use any other read/write modes, press
the
is pressed, the display switches to the home screen.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
or key to select the number for the
.
or key to select the mode and then run it.
or the menu key to return to the