Brother KE-430HX Service Manual page 7

[3] Warning labels
The following warning labels appear on the sewing machine.
Please follow the instructions on the labels at all times when using the machine. If the labels have been removed or are
difficult to read, please contact your nearest Brother dealer.
1
2 Touching areas where high voltages are present will result in severe injury.
Turn off the power before removing the cover.
3
Be careful to avoid injury from the moving thread
4
take-up.
Be careful not to get your hands caught when
5
returning the machine head to its original position
after it has been tilted.
Be sure to connect the ground. If the ground
6
connection is not secure, you run a high risk of
receiving a serious electric shock, and problems
with correct operation may also occur.
7
Direction of operation
8 Do not hold, otherwise problems with operation or
injury may occur.
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Safety devices
*
Eye guard, Finger guard,
DT solenoid cover, Thread take-up cover,
Side cover , Rear cover, etc.
(KE-430HX only)
9
Do not hold this part when
tilting the machine head back,
otherwise problems with
operation or injury may occur.
High temperature warning
10
display
11
v