Brother KE-430HX Service Manual page 69

430HX/HS:
Intermediate work clamp height (L):
1 (mm) to 17 (mm)
(Initial value is 1.)
Maximum work clamp height (H):
10 (mm) to 17 (mm)
(Initial value is 14.)
438HX/HS:
Work
Intermediate work clamp height (L):
clamp
1 (mm) to 13 (mm)
height
(Initial value is 1.)
Maximum work clamp height (H):
6 (mm) to 13 (mm)
(Initial value is 10.)
* It is possible to change the value of
intermediate work clamp height (L) only
when memory switch No. 071 is set to "2" or
memory switch No. 072 is set to "2" or "5".
KE-430HX/KE-430HS, BE-438HX/BE-438HS
5. SETTING FUNCTION
Initial value
58