Lower Shaft Mechanism - Brother KE-430HX Service Manual

7-7. Lower shaft mechanism

1. Bolt [Loosen]
2. Driver
3. Adjusting stud [Pull out]
4. Set screw [Loosen]
5. Screw
6. Oil tube support
7. Screw
8. Cord holder U3
9. Shuttle race base assembly
10. Socket bolts (S/P washer) [2 pcs]
11. Splash plate
12. Rubber caps [2 pcs]
13. Set screws [4 pcs: Loosen]
KE-430HX/KE-430HS, BE-438HX/BE-438HS
If the adjusting stud 3 will not pull out,
screw a M3 or similar screw (1) into the
tap hole and then pull on the M3 or
similar screw (1) so that the adjusting
stud 3 can be removed.
(Continued on next page.)
7. DISASSEMBLY
3988B
3989B
96