Brother KE-430HX Service Manual page 37

Item
Check details
No.
Work clamp switch 1
IN-09
Work clamp switch 2
Start switch
STOP switch
IN-10
Thread breakage
detector
Home position sensor of
X motor
Home position sensor of
IN-11
Y motor
Home position sensor of
P motor
Option sensor
IN-12
Air switch
External input 1
IN-13 External input 2
External input 3
Panel display
Input status
(minimum value -
maximum value)
ON / OFF ON when pressed
ON / OFF ON when pressed
ON / OFF ON when pressed
ON when detected,
ON / OFF / NO OFF when not detected,
NO when not connected
ON when detected,
OFF when not detected,
NO when not connected
ON / OFF * ON is only displayed at
the instant the thread
breakage sensor detects
a breakage.
ON when detected,
ON / OFF
OFF when not detected
ON when detected,
ON / OFF
OFF when not detected
ON when detected,
ON / OFF
OFF when not detected
ON when detected,
ON / OFF
OFF when not detected
ON when detected,
ON / OFF
OFF when not detected
ON when detected,
ON / OFF
OFF when not detected
ON when detected,
ON / OFF
OFF when not detected
ON when detected,
ON / OFF
OFF when not detected
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Judgment
Depress the work clamp switch
of the 2-step foot switch
(option) to the 1st step
Depress the work clamp switch
of the 2-step foot switch
(option) to the 2nd step
Depress the start switch of the
2-step foot switch (option)
Connect the STOP key (option)
and then press it.
Pass a thread under the thread
breakage sensor (option).
---
---
---
---
---
---
---
---
4. FUNCTION SETTINGS
Checking method
26