Checking Pattern Data; Copying Sewing Data - Brother KE-430HX Service Manual

5. SETTING FUNCTION

5-1-3. Checking pattern data

You can check the tension information (section numbers and tension codes) in pattern data.
1
Exit pattern editing mode
2
Touch the back key
・ The display will return to the setting menu screen.

5-1-4. Copying sewing data

Editing (adding, changing or deleting) of the tension codes within pattern data is limited to additional programs.
Because of this, if you would like to edit a standard program which has already been registered, you will need to copy the
program to an additional program.
For details on the program copying method, refer to "5-16. Copying programs (additional programs)".
* You can use the initialization or additional program deletion functions to delete any sewing program data which has been
added to that program by copying. Refer to "9-23. Data initialization method" and "5-7. Deleting additional programs".
43
or the menu key .
KE-430HX/KE-430HS, BE-438HX/BE-438HS
Carry out steps 1 to 3 in "5-1-2. Switching to pattern
editing mode" to switch to pattern editing mode.
Press the needle movement change key [
move the work clamp/button clamp by one stitch.
・ The section number, tension code and number of
(1)
stitches are displayed at the current position.
You can press the section change key [
the section number side to move the work clamp/button
clamp automatically to the start of the section.
: Moves in the forward direction
: Moves in the reverse direction
] or [ ] to
] or [ ] (1) on