Labels & Cosmetics - Grizzly G0767Z Owner's Manual

411
409
412
REF PART # DESCRIPTION
401 P0767Z401 ELECTRICITY LABEL
402 P0767Z402 ABRASION INJURY HAZARD LABEL
403 P0767Z403 WARNING LABEL
404 P0767Z404 BELT SPEED NOTICE LABEL
405 P0767Z405 MODEL NUMBER LABEL
406 P0767Z406 GRIZZLY.COM LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
BUY PARTS ONLINE AT GRIZZLY.COM!
-46-
Scan QR code to visit our Parts Store.
Labels & Cosmetics
401
410
413
402
G0767Z
grizzly.com
Specifications
WARNING!
Motor: 2.4, 3 HP, 220V, 3-Phase, 60 Hz To reduce risk of serious personal injury:
Full-Load Curent Rating: 15A 1. Read and understand owner's manual
Motor Speed (High): 3440 RPM before operating.
Motor Speed (Low): 1720 RPM 2. Always wear approved eye and ear
Sanding Belt Speed (High): 6181 FPM protection, respirator, leather gloves, and
Sanding Belt Speed (Low): 3583 FPM protective clothes to guard against flying
Sanding Belt Length: 78-3/4" sparks.
Sanding Belt Width: 4" 3. Only plug power cord into grounded outlet.
Number of Profile Rollers: 7 4. Never touch moving sandpaper or reach
Grinding Capacity: 3/4" – 3" O.D. over machine when sandpaper is moving
and covers are open.
Angle Range: 90° – 30°
Weight: 290 lbs. 5. Make sure grinder is properly assembled,
adjusted, and stable before operating.
6. Never force workpiece into sanding surface.
7. DO NOT sand in a flammable environment
or near combustibles.
8. Turn motor OFF and disconnect power
before changing sandpaper, making
adjustments, or servicing.
9. DO NOT wear loose clothing, jewelry, or
other articles that can get entangled. Tie
back long hair and roll up sleeves.
10. DO NOT expose to rain or use in damp
locations.
11. DO NOT operate when tired or under
influence of drugs or alcohol.
12. Prevent unauthorized use by children or
untrained users.
407
401
REF PART # DESCRIPTION
407 P0767Z407 MACHINE ID LABEL
409 P0767Z409 DISCONNECT POWER LABEL
410 P0767Z410 GRIZZLY NAMEPLATE
411 P0767Z411 ABRASION INJURY HAZARD LABEL
412 P0767Z412 TOUCH-UP PAINT, GRIZZLY GREEN
413 P0767Z413 TOUCH-UP PAINT, GLOSSY BLACK
Model G0767Z (Mfd. Since 11/17)
WARNING!
READ MANUAL!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when using
this machine.
ABRASION
INJURY HAZARD!
Do not touch moving belt
or personal injury could
occur!
403
NOTICE
To avoid serious damage to machine, turn
power OFF before changing belt speed or
belt direction.
404
405
406