Table of Contents
Advertisement
• 1:1 Sizing (Labels are
actual size)
(02/05/16)
• Labels must be made of
oil-resistant material
MODEL G0510ZW
• 1:1 Sizing (Labels are
actual size)
3
⁄
HP SHAPER
(02/05/16)
4
• Labels must be made of
WARNING!
Specifications
oil-resistant material
To reduce risk of serious injury when using this machine:
1. Read and understand owner's manual before operating.
2. Always wear approved eye protection and respirator.
3. Avoid entanglement with moving parts—tie back long hair, roll up
long sleeves, and do not wear loose clothing, gloves, or jewelry.
MODEL G0510ZW
4. Disconnect power before changing cutters or adjusting/servicing
shaper.
⁄
HP SHAPER
3
5. Before starting, ensure shaper is stable and properly set up, guards
4
are in place, and both spindle nuts are tight.
6. Always use overhead guard or a guarding fixture when free-hand
WARNING!
Specifications
shaping or when adjustable fence is not in place.
7. Always keep fingers at least 6" away from spinning cutter—use jigs,
To reduce risk of serious injury when using this machine:
holding fixtures, or a power feeder when necessary to maintain a
1. Read and understand owner's manual before operating.
safe distance.
2. Always wear approved eye protection and respirator.
8. Always feed workpiece against rotation of cutter.
3. Avoid entanglement with moving parts—tie back long hair, roll up
9. Do not use awkward hand positions while feeding workpiece.
long sleeves, and do not wear loose clothing, gloves, or jewelry.
10. Reduce risk of kickback by taking multiple passes when removing a
Date
4. Disconnect power before changing cutters or adjusting/servicing
large amount of material.
shaper.
11. Never operate shaper while intoxicated, distracted, or tired.
5. Before starting, ensure shaper is stable and properly set up, guards
12. Do not expose machine to rain or dampness.
S/N
are in place, and both spindle nuts are tight.
13. Prevent unauthorized use by children or untrained users; restrict
6. Always use overhead guard or a guarding fixture when free-hand
access or disable machine when unattended.
shaping or when adjustable fence is not in place.
200
7. Always keep fingers at least 6" away from spinning cutter—use jigs,
holding fixtures, or a power feeder when necessary to maintain a
safe distance.
8. Always feed workpiece against rotation of cutter.
9. Do not use awkward hand positions while feeding workpiece.
10. Reduce risk of kickback by taking multiple passes when removing a
Date
large amount of material.
11. Never operate shaper while intoxicated, distracted, or tired.
12. Do not expose machine to rain or dampness.
S/N
13. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
WARNING!
51 x 84mm
51 x 84mm
51 x 84mm
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
51 x 84mm
51 x 84mm
51 x 84mm
36 x 32mm
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
202
36 x 32mm
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
206
REF PART #
200
P0510ZW200 EYE/EAR/LUNG LABEL
201
P0510ZW201 READ MANUAL LABEL
202
P0510ZW202 ELECTRICITY LABEL
203
P0510ZW203 DISCONNECT 110V LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
Model G0510ZW (Mfd. Since 9/16)
Labels & Cosmetics
162 x 105mm
162 x 105mm
If
If
DESCRIPTION
G0510ZW Machine Labels
(02/05/16)
Labels marked *** have changed since last sending.
***
Specifications
Motor: 1 HP, 110V, Single-Phase, 60 Hz
Full-Load Amp Draw: 14A
Motor Speed: 3450 RPM
Spindle Speed: 11,000 RPM
Spindle Size: 1/2"
Spindle Travel: 7/8"
Maximum Cutter Diameter: 2-7/8"
Maximum Cutter Height: 1-9/16"
Table Size: 17-7/8" X 15-1/2"
Floor-to-Table Height: 34-1/4"
Weight: 154 lbs.
G0510ZW Machine Labels
(02/05/16)
Date
Labels marked *** have changed since last sending.
S/N
Manufactured for Grizzly in China
***
201
Specifications
Motor: 1 HP, 110V, Single-Phase, 60 Hz
To reduce risk of serious injury when using this machine:
Full-Load Amp Draw: 14A
1. Read and understand owner's manual before operating.
Motor Speed: 3450 RPM
2. Always wear approved eye protection and respirator.
Spindle Speed: 11,000 RPM
3. Avoid entanglement with moving parts—tie back long hair, roll up
Spindle Size: 1/2"
long sleeves, and do not wear loose clothing, gloves, or jewelry.
Spindle Travel: 7/8"
4. Disconnect power before changing cutters or adjusting/servicing
Maximum Cutter Diameter: 2-7/8"
shaper.
5. Before starting, ensure shaper is stable and properly set up, guards
Maximum Cutter Height: 1-9/16"
are in place, and both spindle nuts are tight.
Table Size: 17-7/8" X 15-1/2"
6. Always use overhead guard or a guarding fixture when free-hand
Floor-to-Table Height: 34-1/4"
shaping or when adjustable fence is not in place.
Weight: 154 lbs.
To reduce risk of death
7. Always keep fingers at least 6" away from spinning cutter—use jigs,
or serious injury, read
holding fixtures, or a power feeder when necessary to maintain a
manual BEFORE using
safe distance.
machine.
8. Always feed workpiece against rotation of cutter.
9. Do not use awkward hand positions while feeding workpiece.
To get a new manual, call
10. Reduce risk of kickback by taking multiple passes when removing a
(800) 523-4777 or go to
Date
large amount of material.
www.grizzly.com.
11. Never operate shaper while intoxicated, distracted, or tired.
12. Do not expose machine to rain or dampness.
S/N
13. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
Manufactured for Grizzly in China
51 x 84mm
27 x 237mm
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
WARNING!
FOR GRIZZLY MACHINES ONLY!
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
G0510ZW Machine Labels
EYE/EAR/LUNG
To reduce risk of death
artwork changes are required, contact us immediately at manuals@grizzly.com.
or serious injury, read
INJURY HAZARD!
(09/02/16)
manual BEFORE using
Always wear safety
machine.
glasses, ear protection,
To get a new manual, call
and respirator when
Labels marked *** have changed since last sending.
(800) 523-4777 or go to
using this machine.
www.grizzly.com.
***
51 x 84mm
51 x 84mm
Specifications
Motor: 1 HP, 110V, Single-Phase, 60 Hz
Full-Load Amp Draw: 14A
Motor Speed: 3450 RPM
Spindle Speed: 11,000 RPM
27 x 237mm
36 x 32mm
Spindle Size: 1/2"
Spindle Travel: 7/8"
Maximum Cutter Diameter: 2-7/8"
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
Maximum Cutter Height: 2-1/2"
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
Table Size: 17-7/8" X 15-1/2"
Floor-to-Table Height: 34-1/4"
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
Weight: 154 lbs.
artwork changes are required, contact us immediately at manuals@grizzly.com.
Mfd. for Grizzly in China
205
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
REF
PART #
DESCRIPTION
51 x 84mm
204V2 P0510ZW204V2 MACHINE ID LABEL V2.09.16
205
P0510ZW205
GRIZZLY GREEN TOUCH-UP PAINT
206
P0510ZW206
GRIZZLY.COM LABEL
27 x 237mm
FOR GRIZZLY MACHINES ONLY!
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
G0510ZW Machine Labels
(02/05/16)
Labels marked *** have changed since last sending.
***
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material
Specifications
Motor: 1 HP, 110V, Single-Phase, 60 Hz
Full-Load Amp Draw: 14A
Motor Speed: 3450 RPM
MODEL G0510ZW
Spindle Speed: 11,000 RPM
Spindle Size: 1/2"
⁄
HP SHAPER
Spindle Travel: 7/8"
3
4
Maximum Cutter Diameter: 2-7/8"
Maximum Cutter Height: 1-9/16"
WARNING!
Table Size: 17-7/8" X 15-1/2"
Floor-to-Table Height: 34-1/4"
To reduce risk of serious injury when using this machine:
Weight: 154 lbs.
1. Read and understand owner's manual before operating.
2. Always wear approved eye protection and respirator.
3. Avoid entanglement with moving parts—tie back long hair, roll up
long sleeves, and do not wear loose clothing, gloves, or jewelry.
4. Disconnect power before changing cutters or adjusting/servicing
shaper.
Date
5. Before starting, ensure shaper is stable and properly set up, guards
are in place, and both spindle nuts are tight.
6. Always use overhead guard or a guarding fixture when free-hand
S/N
shaping or when adjustable fence is not in place.
7. Always keep fingers at least 6" away from spinning cutter—use jigs,
Manufactured for Grizzly in China
• 1:1 Sizing (Labels are
holding fixtures, or a power feeder when necessary to maintain a
safe distance.
actual size)
8. Always feed workpiece against rotation of cutter.
9. Do not use awkward hand positions while feeding workpiece.
• Labels must be made of
10. Reduce risk of kickback by taking multiple passes when removing a
oil-resistant material
large amount of material.
11. Never operate shaper while intoxicated, distracted, or tired.
12. Do not expose machine to rain or dampness.
13. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
MODEL G0510ZW
162 x 105mm
3
⁄
HP SHAPER
4
WARNING!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
WARNING!
www.grizzly.com.
EYE/EAR/LUNG
51 x 84mm
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
51 x 84mm
51 x 84mm
203
27 x 237mm
162 x 105mm
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
36 x 32mm
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
If
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material
51 x 84mm
MODEL G0510ZW
1 HP SHAPER
WARNING!
To reduce risk of serious injury when using this machine:
1. Read and understand owner's manual before operating.
2. Always wear approved eye protection and respirator.
3. Avoid entanglement with moving parts—tie back long hair, roll up
long sleeves, and do not wear loose clothing, gloves, or jewelry.
4. Disconnect power before changing cutters or adjusting/servicing
shaper.
5. Before starting, ensure shaper is stable and properly set up, guards
are in place, and both spindle nuts are tight.
6. Always use overhead guard or a guarding fixture when free-hand
If
shaping or when adjustable fence is not in place.
7. Always keep fingers at least 6" away from spinning cutter—use jigs,
holding fixtures, or a power feeder when necessary to maintain a
safe distance.
8. Always feed workpiece against rotation of cutter.
9. Do not use awkward hand positions while feeding workpiece.
10. Reduce risk of kickback by taking multiple passes when removing a
Date
large amount of material.
11. Never operate shaper while intoxicated, distracted, or tired.
12. Do not expose machine to rain or dampness.
S/N
13. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
51 x 84mm
51 x 84mm
36 x 32mm
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material
MODEL G0510ZW
⁄
HP SHAPER
3
4
WARNING!
To reduce risk of serious injury when using this machine:
1. Read and understand owner's manual before operating.
2. Always wear approved eye protection and respirator.
3. Avoid entanglement with moving parts—tie back long hair, roll up
long sleeves, and do not wear loose clothing, gloves, or jewelry.
4. Disconnect power before changing cutters or adjusting/servicing
shaper.
5. Before starting, ensure shaper is stable and properly set up, guar
are in place, and both spindle nuts are tight.
6. Always use overhead guard or a guarding fixture when free-hand
shaping or when adjustable fence is not in place.
7. Always keep fingers at least 6" away from spinning cutter—use ji
holding fixtures, or a power feeder when necessary to maintain a
safe distance.
8. Always feed workpiece against rotation of cutter.
9. Do not use awkward hand positions while feeding workpiece.
10. Reduce risk of kickback by taking multiple passes when removin
large amount of material.
11. Never operate shaper while intoxicated, distracted, or tired.
12. Do not expose machine to rain or dampness.
13. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
162 x 10
WARNING!
EYE/EAR/LUNG
INJURY HAZARD!
Always wear safety
glasses, ear protection,
and respirator when
using this machine.
51 x 84mm
51 x 84mm
202
36 x 32mm
If
204V2
162 x 105mm
If
-49-
Advertisement
Table of Contents
