Manual (Quick Start) Program; Max Workout Program - Bowflex Max Trainer M5i Assembly And Owner's Manual

Manual ( Quick Start ) Program
1. Stand on the machine.
2. The Console will show the WELCOME screen.
Note:
3. Push the START/ENTER button to begin the Manual workout program.
4. When done with your workout, stop pedaling and push PAUSE/STOP to pause the workout. Push the PAUSE/STOP button again to end the
workout.
MAX Interval Workout Program
The MAX Interval Workout Program is a workout that alternates from intense
Display shows the Target Burn Rate for the MAX Interval program.
1. Stand on the machine.
Note: During the workout, the Console will show the Target LED Range
3. Push the MAX Interval button.
Note:
4. The workout will begin with an audible countdown as the Burn Rate display needle sweeps across the display and then settles on the current
Burn Rate. The Target Burn Rate LED's will also activate and sweep up to the recommended Burn Rate.
the Target Burn Rate (red LED's) and keep it in the range until the time reaches 00:00.
Note: The Target Burn Rate (LED) Range is provided only as a suggested target. The 5 LED range provides a lesser target, and allows a User
propriate Burn Rate button until the Target Range is near the desired value.
ment, will begin.
The Target LED Range will shift from red to green and sweep to a reduced Burn Rate. During the REST Interval, continue to work out but at a
lower Intensity.
go into Sleep Mode.
Note:
.
33
Assembly / Owner's Manual
TOTAL REST
ACTIVE
USER
TOTAL