Maintenance - Bowflex Max Trainer M5i Assembly And Owner's Manual

Hide thumbs Also See for Max Trainer M5i:
Table of Contents

Advertisement

Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do the necessary tasks.
Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular maintenance is
done. Worn or damaged components must be repaired or replaced immediately. Only manufacturer supplied components can be
used to maintain and repair the equipment.
If at any time the Warning labels become loose, unreadable or dislodged, contact your local distributor for replacement labels.
To reduce the risk of electrical shock or usage of the equipment, always unplug the power cord from the wall outlet and
the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power cord in a secure location.
Daily:
a damp cloth to wipe your machine and Console free of sweat.
Check for smooth roller operation. Wipe the machine to remove dust, dirt, or grime. Clean the rails and
Weekly:
surface of the rollers with a damp cloth.
Note: Do not use petroleum based products.
Make sure all bolts and screws are tight. Tighten as necessary.
Monthly
or after 20
hours:
NOTICE: Do not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep the Console free of moisture.
Replace Batteries in Chest Strap
The heart rate (HR) chest strap uses a CR2032 battery.
Do not perform this procedure outdoors or in moist or wet locations.
1.
Using a coin, loosen the slotted cover on the battery bay. Remove the
cover and battery.
2.
When replacing the battery, insert it in the battery bay with the +
symbol facing up.
Note: The chest strap uses CR2032 size batteries.
3.
Reinstall the cover on the strap.
4.
Discard the old battery. Dispose of in accordance with local
regulations and/or at approved recycling centers.
5.
Inspect your chest strap to ensure function.
Do not use until the equipment has been fully assembled and inspected for correct performance in accordance with the Owner's
Manual.
39
Assembly / Owner's Manual

Maintenance

CR2032
+

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents