Table of Contents
Advertisement
Environment Setup
System IP Set-up
: If an IP is not set up in window, set up system IP in SPR Smart View system.
Select [System IP Set-up] button and input IP address, Subnet mask, Gateway in the next
window appears, and then press [OK] button.
When SPR Smart View Restart Window appears, select [OK] button to restart the system.
[Notice]
When you try to connect to DVR from SPR Smart Viewer(Remote), SPR Smart View(DVR)
checks the site code and password together.
Network Port Setting
: Network ports used for View-Viewer commnunication must be the same on the both sided.
Site's network ports can be assigned here.
3-6
7
Password setup
Password setup
Description
Password change
: You can assign password to three operators and some functions can be set to work with
permission. (Operator 1 can be in charge of everything and operator 2 and 3 can modify
permitted items only.
Level
: Click Level button to change the each operator's password.
Old password : Enter current password you are using
New password : Enter new password
Confirm
: Enter new password again
Password Setup
: 1
st
level administrator can block some mode from 2
The function will be activated by ticking on that box.
[Notice]
If you lose your password, pleas delete C:\WINNT\dPassword.ini and
nd
and 3
rd
level administrator.
3-7
Advertisement
Table of Contents
