Table of Contents
Advertisement
Multi channel Video Surveillance
1
Mainscreen
Division
Alarm/Sensor/Audio toggle button
Description
Screen Division : Displays the selected camera image
System Status : Display time/date, HDD usage.
Screen Division : Select the live image under surveillance. Maximum 16 live image can be
displayed (1, 4, 6, 9, 16 division, 4division rotation mode is possible.)
State Screen : Display for the status of continuous recording, sensor, alarm, motion, audio
or network
Function Select : Emergency recording, alarm off, configuration and displaying recorded image
Camera/Sensor/Alarm : Display status of camera recording, sensor/alarm and audio.
Alarm/Sensor/Audio : Toggle for display and control of alarm/sensor/audio in rotation.
2-1
System Status
Function Select
Camera/Sensor/Alarm/Audio
Screen Division button
2
State Screen
Function Select
Screen Division
Screen division can be done by [Screen Division] button
PTZ camera display
PAN/TILT
Camera name
Screen Division
Camera : Display the position of the camera under surveillance.
The default value is 1[POSITION1]. But you can modify it in setup.
Recording Status : Display recording status of each camera.
For continuous recording in red "Rec", and for motion detection recording in blue "M Rec"
and nothing for no recording.
PTZ camera display : When the installed camera is PAN/TILT, displays green
"PAN/TILT"
REC
Recording status
2-2
Advertisement
Table of Contents
