Table of Contents
Advertisement
Environment Setup
(Interworked) Audio Output
: Through detection of motion, an external sensor's detection, or user's right-clicking the
mouse, the audio data along with the video data of an external monitor can be outputted.
By interworking with the connected external sensor, the audio data of the corresponding
channel can be outputted based on generation of sensor signals.
The audio data of the corresponding camera can be outputted according to detection of
the moving camera images.
By right-clicking on the video channel of a particular camera in the Monitoring mode, the
user can output the audio data of the corresponding channel.
3-3
Recording/Display [Emergency Frame]
Description
Select Camera
: Type in the camera number to set the frames to record per camera during an emerency.
The list of cameras set in Hardware [Camera] tab will be displayed, and displayed
camera number represent channels currently being recoreded.
The recording frame rate per camera will be separately set and saved for each camera.
Recording frame rate per camera
: The user can adjust the number of frames to be recorded during an emergency for each camera.
Left-click on the scroll button, and set the recording frame rate per camera (that will be
displayed as a number on the right side.)
It is recommanded to increase the recording frame rate per camera when a signal is
inputted to a sensor connecting to a certain camera.
[Notice]
• If an emergency situation occurs by Emergency Frame feature, the recorded frames of other
cameras may be lower than he setting.
3-3
Advertisement
Table of Contents
